Nov 27, 2020
How does the vibration polishing machine work?
Vibration polishing machine is a kind of electric tool. The polishing machine is composed of basic elements such as base, polishing plate, polishing fabric, polishing cover and cover. The motor is fixed on the base, and the taper sleeve for fixing the polishing disc is connected with the motor shaft by screws. The polishing fabric is fastened to the polishing disk by the ferrule, and the motor is started by the switch on the base, and the sample can be pressed by hand to polish on the rotating polishing disk. The polishing liquid added in the polishing process can flow into the square plate beside the polishing machine through the drain pipe in the plastic plate fixed on the base. The polishing cover and cover can prevent dirt and other debris from falling on the polishing fabric when the machine is not in use, which will affect the use effect.
Suitable for precision parts such as various metals, non-ferrous metals, hard plastics, etc. Iron parts and steel parts (permeable magnetic material) have good polishing effect.
It is to clean the stains on the surface. When polishing it, first wrap the rubber liner with 600# to 1000# water sandpaper, and then polish it until it is smooth. Pay attention not to excessively rub to avoid wearing the paint layer. . Then use the grinder to add coarse abrasive paste for processing, stop the rough grinding of the surface of the water sandpaper, and then add the abrasive paste to stop polishing and fine grinding. Then use mechanical polishing technology, plus mirror treatment agent to throw away the marks left by rough grinding to achieve the mirror polishing effect of the paint film. The products of Dongguan Guangshengyuan polishing materials that our company has always used are expensive and cost-effective.