How To Use A Barrel Polisher

Today, the small barrel polishing machine brings you the steps of using the polishing machine and share the buying skills of the barrel polishing machine. For the polishing machine, some friends may not know it very well, because everyday life is not too common.

For the barrel polisher, some friends may not understand it very well, because everyday life is not too common, so if we need to use it, we don't know how to operate it. So what about the polisher how to operate it? Today, the small barrel polishing machine brings you the steps of using the barrel polishing machine and share the buying skills of the polishing machine.


Roller polishing machine


How to use the barrel polishing machine

First, (prelude to the work):

1. Firstly, 5S on the work site, clean the sanitation around the work, sort out the idle items, clean up the items unrelated to the work, and discharge the workpieces to the proper position.

2. For the whole machine of the polishing machine, there is no abnormality in the operation of the polishing machine when the power is turned on, and the fixed bolt of the fixing bolt is adjusted.

3, polishing machine operating tools are fully equipped.

Second, (normal operation):

1. During the operation of the polishing machine, it must be operated in accordance with the requirements of the polishing machine.

2. The operator should not wear gloves when the polishing machine is in normal operation. This is clearly stated in the industry.

3. The operator must self-check the effect of the processed items at any time, and check whether there are any abnormalities in the processed workpieces, such as deformation, cloaking, imprinting, etc. It is necessary to keep communication with relevant staff at any time to prevent serious errors.

4. The polishing machine works normally and abnormally. As an operator, it can be heard or can hear the abnormal sound of the machine. Of course, it is necessary to stop working immediately and eliminate the malfunction to operate normally.

5, professional professional operation, is good for people on the polishing machine.

Third, (after work):

1. After stopping the work, keep the cleaning around the polishing machine and clean up the production garbage in time.

2. Place the operation tool in the set position, arrange the workpieces of the processed products, and place them in the proper position.

3. Turn off the power and pull on the device plug wire. Recommended reading: How much polishing stone polishing and polishing stone polishing construction process

Huzhou Shuanglin Hengxing Polishing Equipment Factory

Tel: 86-572- 3972679

Fax: 86-572- 3972388

Email: admin@hxpolishing.com