Talk About The Maintenance Of Automatic Polishing Machine A Few Tips

Talk about the maintenance of automatic polishing machine a few tips

First of all, before the maintenance of automatic polishing machine, be sure to read the manual in detail, familiar with the use of each part and should pay attention to the matter: (1) the machine box cleaning operations, at least once a week to ensure that Blocking phenomenon. (2) regularly on the skateboard and the knife and the front knife cleaning and maintenance lubrication to do once, the general maintenance cycle in a month or so. (3) Lubricant is an important part of the automatic polishing machine maintenance work, generally in 3 months or so after all the bearings need to be re-added again lubricants. (4) long-term need to maintain the parts of the reducer wheel oil, the general 1 to 2 years to add once. (6) each time the refueling, need to grasp the amount of time to add should not be excessive, so as to avoid the switch oil dip and machine failure. In daily use, should pay attention to keep the machine in a dry, do not let the machine contact with water things, not to use water directly flush. If there are other places do not understand, you can contact us for consultation.

Huzhou Shuanglin Hengxing Polishing Equipment Factory

Tel: 86-572- 3972679

Fax: 86-572- 3972388


skype: zhangjun_0629  

Mobile/ Whatsapp/ Wechat/ Viber: +86 135 6722 9585